• XC4695 Manual Introduction： ： ： ： XC4695 is an USB2.0/E-SATA dual HDD docking station that allows direct data exchanging between SATA II 3.0G and High-speed USB. It supports Offline Clone, which is able to copy data and system files from Source HDD to Target HDD completely via finger touch.

This tool will download and update the correct Zebronics SATA HDD DOCKING STATION driver versions automatically, protecting you against installing the wrong SATA HDD DOCKING STATION drivers. About The Author: Jay Geater is the President and CEO of Solvusoft Corporation, a global software company focused on providing innovative utility software.

• Function： ： ： ： * Complies with Serial ATA International Organization: Serial ATA Revision 2.6 * Supports SATA 1.5G/3.0G Speed * Supports SATA Hot swap * Supports SATA Host/Device controller configuration * Complies with USB 2.0 electrical specification * Supports USB 2.0 High-Speed and Full-Speed * Complies with USB Mass Storage Class, Bulk-Only Transport Specification * Supports clone function. • 1, 1, 1, 1, Offline clone a、 Insert source HDD to Bay ‘A’; target HDD to Bay ‘B’, and then turn on the power b、Once the Bays indicators are on, that means XC4695 is ready for clone. • c、Press and hold the clone button for 3 seconds until the indicator light is on, press the button once more for Clone confirmation.

Offline clone is starting to process. D、Clone progress indicator flashes and shows the progress (25%, 50%, 75%, 100%).

This set of possibilities unraveled early when Mattingly was removed from the Apollo 13 mission because he had no documented immunity to measles, to which he might have been exposed. Had Grissom commanded the first lunar landing, Eisele would therefore have been a logical choice as LMP. Donn Eisele According to the Astronaut Hall of Fame timeline, at the time of the Apollo 1 fire, Slayton planned to assign Eisele as LMP for the F mission (which became Apollo 10) with Grissom as commander. He flew as CMP on Apollo 16 and commanded two Shuttle Missions.

• e、Once clone is finished, all progress indicators will light up. F、Turn off power and take out the HDD carefully 2, USB Clone Drive Installation a、Please insert the CD drive and click “setup.exe”. Choose your language and click “ Next” - 5. • b、Fill in the S/N # accordingly (you can find the S/N# on the cover of CD drive) c、Click “Install” for installation - 6. • d、Installation progress is showed e、please click “Done” once installation is finished. • 3, 3, 3, 3, Clone from Source HDD to Target HDD a、Please insert Source HDD and Target HDD well to the docking, connect XC4695 to PC via USB cable. Turn on the power, you can find the clone icon on the right bottom of window, then double click the CLONE Icon to start the program.

• c、Press start to proceed with Clone. D、Clone progress is showed - 9. • e、Click “OK” once clone is finished f、You should find the same contents of Source HDD in Target - 10.

• g、If your target HDD has extra space, the system will allocate it to “unallocated” area automatically, please refer to the below picture. （Windows system only allows a maximum of four primary partitions, if the original disc already exist four primary partitions, then it can not distinguish the extra space but logical drives can have more than one ）. • b、Right click 〝New partition〞for further action c、“Next” - 12. • d、Base on your need and click “Next” e、Please enter the new partition capacity and click “Next” for further action - 13.

• f、Assign the drive letter and “Next” g、Select “quick format” to format the new partition - 14. • h、Click “finish” i、Partition completed, the new partition can be found.